Cleaning tips: How to clean a stove

Not sure how to regain a clean stove after all that Thanksgiving cooking? Cleaning stove tops can be a pain, but consider that dirty cooking surfaces don’t reflect heat as well, meaning that you waste energy and compromise performance when using a messy stove.

Instead, try these useful stove cleaning tips that have worked for me.

When cleaning a smooth top stove, first use a razor blade (yes, I’m serious) to gently scrape off any burnt on food residue. Sometimes smooth top stoves burners discolor with time, but I’ve found that Mr. Clean Magic Eraser works well to fade dark stains. Apply cooktop cleaner (which we sell for about $5 at all Warners’ Stellian stores) with a soft rag or paper towel for general cleaning. Cooktop cleaner also gives a nice, smooth finish to glass- and ceran-top stoves you can’t get from soap and water, sorry!

To clean a gas stove top — like I have at home — remove all grates and burner caps to the sink and simply use soap and water to clean. I scrub off all the food residue that ends up around the burners by sprinkling on some Barkeeper’s Friend and rubbing it off with a moistened towel. Again, the discolorations (I have a white stove) are removed by Magic Eraser and some elbow grease.

The most important tip I have for cleaning gas stoves, though, is properly replacing the now-clean burner caps, as misplacement could cause stove lighting issues.

Any other good tips on how to clean a stove top?

What to Do if Gas Stove Won’t Light

Despite a general dislike for most of the appliances I inherited with my first house, I feel lucky to have a gas stove (or range, as in appliance jargon).

I love cooking, so I appreciate the power and responsiveness of gas.

However, unlike their electric counterpart, gas ranges can’t just be dialed on; their burners must be ignited.

I occasionally struggle with lighting my burners – and I know I’m not alone – so here’s what to check if you’re struggling.

Burner cap
A lot of ignition problems and uneven flames result from food spills and related dirtiness. Routine cleaning and general unslobbiness will avoid this.

After a spill, use a nonabrasive plastic scrubbing pad and mildly abrasive cleanser or soap  to thoroughly clean the cap.

Make sure the cap is completely dry before replacing it over the burner. Take care that alignment pins are lined up with with the cap.

(I know I usually would never say this, but) Don’t put them in the dishwasher.

Burner ports
Burner flames should be about 1″-1.5.” The flame should be blue, not yellow.

If these aren’t the case, your burner ports could be clogged, so you should clean it, following these steps:

  1. Make sure all the controls are off and the stove is cool. Don’t use oven cleaners, bleach or rust remover.
  2. Clean the burner cap as instructed above..
  3. Clean the gas tube opening with a damp cloth.
  4. Replace the burner cap.
  5. Turn on the burner. If the burner does not light, check cap alignment. If the burner still does not light, call appliance service.

Knobs
(This one falls under the “duh” category, but you never know…) Push in the burner knob before turning to light to ensure that it’s set correctly.